Skip to main content
Log in
ABB 3ABD00039553-D — AC Drive (VFD) 600V

ABB 3ABD00039553-D ACS880-04 Drive Module, 710 kW, 721 A, R1

MPN3ABD00039553-D
Active

ABB ACS880-04 single drive module, R11 frame, 710 kW / 721 A normal use, 525-690 V 3-phase input, IP20, IE2.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3ABD00039553-D — Identification
ParameterValue
Frame sizeR11
3ABD00039553-D — Electrical (input)
ParameterValue
Input voltage range525 ... 690 V
Number of phases3-phase
Frequency range47.5 ... 63 Hz
3ABD00039553-D — Output / Performance
ParameterValue
Output power, normal duty710 kW
Output power, heavy duty560 kW
Output power, light overload630 kW
Output current, normal duty721 A
Output current, heavy duty571 A
Output current, light overload705 A
Efficiency level (IE class)IE2
3ABD00039553-D — Mechanical
ParameterValue
Mounting typeModule
NEMA enclosure typeOpen Type
3ABD00039553-D — Environmental
ParameterValue
Degree of protection (IEC, IP)IP20

Product details

The ABB 3ABD00039553-D is a single drive module in an R11 frame, delivering 710 kW normal-use output at 721 A from a 525-690 V three-phase supply. Heavy-duty rating sits at 560 kW / 571 A, light-overload at 630 kW / 705 A.

The three duty ratings matter more than the headline 710 kW. Light-overload (630 kW / 705 A) fits variable-torque fans and pumps that rarely hit peak demand. Normal-use (710 kW / 721 A) assumes the drive runs below rated current most of the time — fine for centrifugal loads with a generous service factor. Pick the duty column that matches your load profile, not the biggest number on the nameplate.

Installation and compliance notes

Mounts as a module — no floor-standing cabinet included, so the panel builder provides the gland plate and buswork. IE2 efficiency is the baseline; if your site requires IE3 or IE4, pair it with a matching motor and check the system loss calculation. WEEE category 4 applies for end-of-life disposal planning.

Frequently asked questions

What is the frame size of this drive module?

R11 — that's the mechanical envelope for the ACS880-04 platform at this power level. It determines cabinet cutouts, busbar spacing, and mounting footprint.

What is the difference between the normal-use, heavy-duty, and light-overload ratings?

Normal-use (710 kW / 721 A) is for variable-torque loads that rarely hit peak current. Heavy-duty (560 kW / 571 A) is for constant-torque loads like conveyors. Light-overload (630 kW / 705 A) sits between — suitable for pumps and fans with occasional overload. Match the duty column to your load profile.

MPN
3ABD00039553-D