The ABB 3ABD00039819-D is an ACS530-01-293A-4 drive rated for 160 kW output power at 293 A continuous current, with a light-overload rating of 278 A at the same power level. It operates on a 380...480 V three-phase supply across 47.5...63 Hz, and is built in the R8 frame size with an IP20 enclosure.
The 293 A normal-use current (In) defines the continuous motor rating at the drive's full 160 kW output. For applications that cycle below rated load, the light-overload curve (IlD) holds 278 A at 160 kW — useful for pumps or fans that rarely hit nameplate current. The 203.0 kV·A apparent power rating gives the transformer sizing target for the feed. Standby loss sits at 47 W, which matters for panel thermal calculations and for any always-on installation where quiescent draw adds up. Efficiency is IE2, the standard level for this drive class; no premium-efficiency derating assumptions needed. Ambient maximum is 40 °C — derate output current above that. IP20 means installation in a clean, dry cabinet; not rated for washdown or dust.