BOM / RFQ

ABB 3ABD00045158 ACS380 drive module, 0.75 kW, 4.8 A

MPN3ABD00045158

Active

ABB ACS380 machinery drive module, 3ABD00045158, 0.75 kW normal use, 4.8 A output, 200-240 V single-phase, IP20, frame size R1.

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3ABD00045158 — Electrical Output
Parameter	Value
Output power, normal duty (Pn)	0.75 kW
Output current, normal duty (In)	4.8 A
Output power, heavy duty (PhD)	0.55 kW
Output current, heavy duty (IhD)	3.7 A
Output power, light-overload duty (PlD)	0.75 kW
Output current, light-overload duty (IlD)	4.6 A
Efficiency class (IE)	IE2

3ABD00045158 — Electrical Input
Parameter	Value
Input voltage range	200 ... 240 V
Number of phases	1-phase
Frequency	47.5 ... 63 Hz

3ABD00045158 — Mechanical
Parameter	Value
Degree of protection (IP)	IP20
Enclosure type (NEMA)	Open Type
Frame size	R1
Mounting type	Module

Product details

Drive module for light machinery

The ABB 3ABD00045158 is an ACS380-series machinery drive module sized for a 0.75 kW motor at normal duty, delivering 4.8 A continuous from a 200-240 V single-phase supply. Frame size R1 keeps it compact for panel mounting, and the IP20 enclosure suits clean indoor environments. Light-overload use (variable-torque fans, centrifugal pumps) stays at 0.75 kW, 4.6 A.

Signal integrity and installation notes

Single-phase input means the DC bus ripple is higher than a three-phase feed — expect more common-mode noise on the motor cable. Shield the motor leads at the drive end only; floating the motor-end shield keeps VFD-induced noise off the ground loop. The module accepts 47.5 to 63 Hz line frequency, so it handles weak grids without derating. IE2 efficiency is baseline for this power class; no external braking resistor is included, so plan for one if the load regenerates.