Drive module for 250 kW motor loads
The ABB 3ABD00045773-D is an active-production LV AC general purpose drive module rated for 250 kW normal-use output at 505 A and 380-480 V three-phase input. Frame size R10, IP00 open type — this is a chassis module intended for panel integration, not standalone floor mounting.
Three duty ratings are listed: normal-use (Pn 250 kW, In 505 A), heavy-duty (PhD 200 kW, IhD 361 A), and light-overload (PlD 250 kW, IlD 485 A). The heavy-duty figure governs continuous operation on a constant-torque load like a conveyor or extruder; the normal-use rating applies to variable-torque loads such as centrifugal pumps and fans. The light-overload current sits between the two — useful for applications with occasional peak demand but not sustained high torque.
Physical and electrical fit
Frame R10 defines the mechanical footprint and bus-bar layout — verify panel cutout and mounting rail compatibility with the installation manual. Input accepts 380-480 V at 47.5-63 Hz, three-phase. IP00 means no built-in protection against dust or water ingress; the enclosure must provide the required IP rating. Efficiency class IE2 is standard for this generation.