The ABB 3ABD00046436 is an ACS380 series LV AC machinery drive module, order code ACS380-040C-17A0-4+L538. It delivers 7.5 kW output power at 17 A in normal (light-overload) use, with a heavy-duty rating of 5.5 kW at 12.6 A — the figure that governs continuous duty on a pump or fan running at full load without a break. Input accepts 380-480 V three-phase, 47.5-63 Hz, covering 50/60 Hz mains globally.
The normal-use output current of 17 A (7.5 kW) matches a 400 V 4-pole induction motor at light overload — think conveyors or fans with moderate starting duty. The heavy-duty curve drops to 12.6 A (5.5 kW), which is the rating to specify for constant-torque loads like extruders or positive-displacement pumps where the drive must sustain full current cycle after cycle. A third light-overload figure of 16.2 A at 7.5 kW sits between the two; it reflects the same power but slightly lower current than the normal-use line, likely a different test condition or ambient.
Frame size R3 with an IP20 open-type enclosure — panel-mount only, no washdown rating. The module form factor (Mounting Type: Module) means it bolts into a cabinet backplate or sub-panel; plan for top and bottom cable entry clearance per the R3 drilling template. IE2 efficiency class meets the minimum for most industrial installations in regions that mandate motor efficiency tiers.