The ABB 3ABD00046576-D is an ACS580-01 wall-mounted general-purpose drive rated for 4 kW normal-duty output at 9.4 A on a 380-480 V three-phase supply, 47.5-63 Hz. That normal-duty rating is the one to match for variable-torque loads like pumps and fans — the drive will handle continuous operation at that current without derating. For constant-torque applications such as conveyors or positive-displacement pumps, the heavy-duty rating of 3.0 kW at 7.2 A is the governing spec; the drive is sized for that lower continuous current when the load demands full torque across the speed range. Frame size R1 defines the physical footprint — wall-mounted, NEMA Type 1 enclosure, IP21. That IP21 rating means it's intended for clean indoor environments; it will tolerate some dust ingress but not washdown or condensation. If the installation is inside a ventilated cabinet or a climate-controlled electrical room, this is the right protection class. For outdoor or wet locations, the drive needs a higher-rated enclosure or a separate cabinet.
Integration notes
Wall-mounted, so it needs a flat vertical surface with clearance for airflow — the IP21 enclosure has no conduit knockouts on the top, so plan cable entry from the bottom gland plate. The 380-480 V input range covers 400 V and 480 V grids globally; the 47.5-63 Hz frequency range handles 50 Hz and 60 Hz supplies without derating. The light-overload rating (4.0 kW, 8.9 A) sits between normal and heavy duty — use it when the application has occasional overloads but not continuous full torque at low speed.