The ABB 3ABD00046721-D is an ACS580-01 general-purpose drive rated for 4 kW normal-use output at 9.4 A, with a heavy-duty rating of 3.0 kW and 7.2 A. It runs on three-phase 380–480 V input, 47.5–63 Hz, and comes in a wall-mount IP21 enclosure, Frame R1. Efficiency class is IE2.
The 9.4 A normal-use current is the number to match against your motor's full-load amps for continuous duty. Heavy-duty at 7.2 A covers higher starting torque or cyclic loads — that's the rating to check if you're driving a pump or fan with a heavy breakaway. The 4 kW normal power matches a standard 4-pole induction motor on 400 V; the 3.0 kW heavy-duty figure is what the drive can deliver when you need extra torque margin. IP21 means it's protected against fingers and dripping water — fine for a clean panel or sheltered wall mount, but not for washdown areas or dusty floors. If the drive lives near a wash station or outdoors, you'd want a higher ingress rating. The wall-mount Frame R1 is compact — typical for this power class — and mounts directly to a backplate or unistrut. No separate cabinet required if the environment stays within IP21 limits.