The 3ABD00046767: Frame size R3 defines the mounting footprint and the heat sink profile. If you're replacing an existing R3-frame drive, the bolt pattern and gland-plate cutout carry over without panel rework.
Normal-use output (Pn) is 22 kW at 46 A — that's the continuous rating for a standard HVAC fan or pump load. Light-overload duty (PlD) also holds at 22 kW but draws 42.8 A, which gives a tighter current limit for cyclic loads like variable-torque applications. Both ratings use the same 380-500 V input range, so no supply-side change is needed between duty classes.
The drive arrives as a single unit with the wall-mounting bracket attached. No separate accessory pack to chase — the IP20 enclosure is the delivered state. The WEEE category (5, Small Equipment) confirms it falls under standard small-device end-of-life handling, not a large-appliance return scheme.