The ABB 3ABD00047986-D is a wall-mounted general-purpose drive, rated 7.5 kW normal-duty output at 17 A from a 380–480 V three-phase supply.
The drive carries three duty ratings. Normal use (Pn) is 7.5 kW at 17 A — that's your continuous rating for centrifugal pumps and fans. Light-overload (PlD) matches the normal-duty power at 7.5 kW but at a slightly lower 16.2 A, which gives you a bit more headroom on the current side for occasional overloads. Pick the duty cycle that matches your load profile; the heavy-duty number is the one that governs if you're driving a screw compressor or a mixer.
Wall-mounted in a Type 1 enclosure with IP21 protection. Frame size is R2.
Efficiency and lifecycle
Rated IE2 efficiency level, which meets the base requirement for most industrial applications in regions where IE2 is still accepted for variable-torque loads. The lifecycle status is active — this is a current-production unit, not a phase-out or NRND part. That means you can spec it into a new BOM without worrying about a last-time-buy notice arriving mid-project.