The 3ABD00048288-D is an ABB ACS580-01-039A-4+P973 general-purpose wall-mounted drive. It delivers 18.5 kW at 38 A in normal use, with a heavy-duty rating of 15 kW at 31.6 A for constant-torque loads like conveyors or extruders. Input accepts 380-500 V three-phase, 47.5-63 Hz. Enclosure is IP21 with NEMA Type 1, suitable for clean indoor environments.
The normal-use output (18.5 kW, 38 A) is the headline number for sizing against a standard 400 V motor. The heavy-duty curve (15 kW, 31.6 A) is the one to watch for applications requiring 150% overload for 60 seconds — that's the rating that governs real-world starting and intermittent duty. Light-overload use is listed at 18.5 kW and 36.1 A, which sits between the two. If your motor plate calls for 36 A FLA, the light-overload figure confirms headroom without stepping up a frame.
Wall-mounted, frame R3. The IP21 enclosure is rated for indoor use only — no washdown or dust environments. Efficiency is IE2, which meets current minimum standards for most regions. The WEEE category 5 classification (small equipment under 50 cm) applies for end-of-life disposal tracking.