The 3ABD00048300-D: The drive lists three duty points: normal-use (Pn 200 kW, In 430 A), heavy-duty (PhD 200 kW, IhD 363 A), and light-overload (PlD 200 kW, IlD 400 A). Normal-use covers variable-torque centrifugal fans and pumps where peak current is brief. Light-overload sits between them, useful for applications with moderate short-term overloads. All three converge on the same 200 kW power rating, which means the drive's thermal design is built around that output; the current difference reflects the overload profile each duty class allows.
Mounting and enclosure fit
Wall-mounted with a Type 1 NEMA enclosure and IP21 ingress protection — it's suited for indoor, clean industrial environments where drips and falling dirt are the main concern, not washdown or dust. The R9 frame is the physical footprint; if you're slotting this into an existing panel layout, check the mounting dimensions against your backplate. The 430 A output current at 200 kW means the cable entry and gland plate need room for the supply and motor cables — typically M63 or M50 glands depending on the cable spec. No DIN-rail mounting on a drive this size; it bolts directly to a flat surface with clearance for airflow above and below.