The ABB 3ABD00048398-D is a general purpose wall-mounted drive rated 1.5 kW normal-use output at 4 A, 380-480 V three-phase input. Heavy-duty use is rated 1.1 kW at 3.3 A — that is the constant-torque figure for conveyors, mixers, or positive-displacement loads. Light-overload duty matches the normal-use power at 3.8 A, covering standard pump and fan profiles with headroom for short-duration overcurrent events. IP21 enclosure (NEMA Type 1) means it is for indoor, clean environments — no washdown, no dust. Wall-mount only; no through-panel kit needed for this frame.
Frame R1 drives are generally stocked across the distribution network, but lead time varies by region and batch size — a quick RFQ confirms the slot.
Integration Notes
IE2 efficiency class — meets the minimum for most European and UK installations where motor efficiency regulations apply. If the spec calls for IE3 or IE4, this drive will pair with a higher-efficiency motor but the drive itself is not the efficiency bottleneck. WEEE Category 5 (Small Equipment, under 50 cm any dimension) — relevant for EU waste compliance documentation at end of life.