The ABB 3ABD00050013-D is an ACS530-series variable frequency drive built for 3-phase induction motors. It delivers 2.2 kW of normal-use output power at 5.6 A, fed from a 380 to 500 V input supply. The drive carries an IE2 efficiency rating, so it meets the base EU motor-efficiency standard for this power class. Rated IP20, it's an open-type unit meant for a clean electrical enclosure — not out in the grease alongside the motor, but inside the panel where the PLC and contactors live.
The 5.6 A normal-use output current is the number that governs motor sizing — match it to your motor's full-load amps, not the nameplate kW alone. The light-overload rating drops to 5.3 A, so if your application cycles hard or needs a short burst above rated torque, that's the figure to watch. Input frequency tolerance spans 47.5 to 63 Hz, which covers both 50 Hz and 60 Hz grids without derating. The wall-mounting format and IP20 enclosure mean you'll land it on a backplate inside a cabinet; no outdoor or washdown duty here.