The 3ABD00050027-D: The ABB ACS530-01-169A-4+P974 is a 90 kW normal-use drive in frame size R7, delivering 169 A continuous output on a 380-500 V three-phase supply. The light-overload rating is 161 A, so if your motor draws less than that, the drive handles the full 90 kW without derating. IP20 enclosure means it goes in a clean panel — no washdown or dust-tight requirement.
The 169 A normal-use current is the number that decides the cable and breaker sizing — match it to your motor's full-load amps, not the 90 kW power rating, because power depends on actual load and voltage. The 161 A light-overload figure tells you the drive can sustain a bit less current continuously if you need headroom for intermittent peaks. IE2 efficiency is the baseline for the ACS530 family; if your project requires IE3 or IE4, you'd look at the ACS580 or ACS880 series. Frequency range of 47.5 to 63 Hz covers 50 Hz and 60 Hz grids without adjustment.