Drive module for light-to-medium industrial loads
The ABB 3ABD00057514 is an ACS380-040C series drive module rated for 2.2 kW normal-use output at 5.6 A, running on a 380-480 V three-phase supply. The 5.6 A normal-use figure is what you size the motor and cabling for on a standard constant-torque application; the heavy-duty rating of 1.5 kW at 4 A covers the same motor under a tougher duty cycle — think conveyors with frequent starts or light crane hoists. Light-overload use matches the normal-use power at 2.2 kW but draws 5.3 A, a slight reduction that accounts for the thermal headroom needed when the drive runs near its continuous limit in a warm cabinet. Frame size R1 keeps the module compact — it fits the standard ACS380 panel cutout and shares the same mounting footprint as other R1 drives in the family. IP20 means it is intended for enclosure mounting; the open-type NEMA rating confirms it needs a cabinet to keep dust and tools out. The 47.5-63 Hz input frequency range covers both 50 Hz and 60 Hz grids, so the same part works on a European 50 Hz line or a North American 60 Hz supply without derating.