The ABB 3ABD00057888 is an LV AC machinery drive module from the ACS380 series, rated for 22 kW normal-use output power at 45.0 A (IEC). It accepts 380...480 V three-phase input across 47.5...63 Hz and carries an IE2 efficiency level. The module is IP20, open-type NEMA, and mounts as a standalone module in frame size R4.
This drive is specified with three overload duty curves. Normal use (Pn) delivers 22 kW at 45.0 A continuous — that is the rating for a constant-torque load like a conveyor or pump running within its base speed range. Heavy-duty use (PhD) drops to 18.5 kW at 38.0 A, which covers higher starting torque or cyclic overloads typical of crushers or extruders. Light-overload use (PlD) sits at 22.0 kW and 42.8 A, a middle ground for variable-torque fans or centrifugal pumps where occasional overload is expected. The key decision point: if your motor nameplate calls for 22 kW continuous, the normal-use rating fits; if the application demands 150% overload for 60 seconds, size against the heavy-duty numbers.