The ABB 3ABD00057966 is a low-voltage AC machinery drive module from the ACS380 series, configured as an IEC-rated unit delivering 4 kW normal-use power at 9.4 A output current. It runs on a 3-phase 380…480 V supply and accepts line frequencies from 47.5 to 63 Hz, covering 50/60 Hz grids globally. Frame size R1 keeps the package compact for panel integration, and the IP20 enclosure suits clean indoor environments.
Duty ratings and real-world fit
The drive carries three duty ratings that map to different load profiles. Normal-use (Pn) is 4 kW at 9.4 A — the figure for constant-torque applications like conveyors or mixers. Heavy-duty (PhD) drops to 3.0 kW at 7.2 A, sized for higher peak demands or overload cycles. Light-overload (PlD) returns to 4.0 kW but at 8.9 A, reflecting a slightly lower current ceiling than normal use. The IE2 efficiency level means it meets the minimum standard for energy performance in most industrial installations.
The R1 frame size keeps the footprint manageable; verify clearance for the IP20 zone above and below the unit. No forced cooling is implied by the open type, so ambient temperature and derating curves from the manual govern the final current capacity.