The ABB 3ABD00058711-D is a low-voltage AC wall-mounted drive in Frame R1, rated 0.75 kW normal-use output at 2.6 A, with light-overload capability at 0.75 kW and 2.5 A. It accepts 380-500 V three-phase input across 47.5-63 Hz, and carries IP20 protection in a NEMA Open Type enclosure.
The normal-use current of 2.6 A at 0.75 kW is the rating that governs motor sizing — it matches a standard 1 hp (0.75 kW) induction motor on 400 VAC. The light-overload current (2.5 A) is essentially the same curve, so the drive doesn't give you extra headroom for short-duration overloads; it's sized for continuous HVAC duty. Frame R1 means the drive body is compact enough to mount on a wall plate or inside a small panel, but the IP20 rating says keep it in a clean environment — no washdown or outdoor exposure.
Mounting & wiring notes
Wall-mounted, open type — no separate enclosure needed if the drive sits in a controlled electrical room. The 47.5-63 Hz frequency acceptance means it handles 50 Hz and 60 Hz supplies without configuration. Three-phase input, so land, L2, L3; the motor output terminals connect to the motor leads. Ground bond per local code; use a torque driver on the power terminals — the frame R1 terminal block is small, and overtightening strips the threads.