The ABB 3ABD00059347-D drive is rated for 500 kW normal-use output power and 880 A normal-use output current. It runs on a 380-480 VAC three-phase supply, 47.5-63 Hz, in a frame R11 package with IP00 open-type enclosure.
Sizing and duty
The normal-use rating (500 kW, 880 A) and light-overload rating (500 kW, 865 A) are effectively identical here — the drive is sized for continuous heavy duty without a separate overload headroom band. That means the 880 A figure governs the full-speed continuous load; no need to derate for a higher overload class.
IP00 and open-type NEMA means this is a cabinet-built unit — no integral enclosure. Plan for a clean, filtered-air cabinet with enough volume to handle the heat from 500 kW of drive losses. Frame R11 is a bolted-in chassis; verify gland-plate access and bus-bar clearance before laying out the panel.