The ABB 3ABD00059562-D is a wall-mounted LV AC drive for 3-phase induction motors with position control onboard. Rated for 110 kW normal duty (119 A) and 90 kW heavy duty (98 A), so you size it to the motor nameplate, not the maximum. Input voltage spans 525 to 690 V, 48 to 63 Hz — common for 690 V industrial grids in mining or marine. The IP21 enclosure keeps out fingers and dripping water, but it's Open Type per NEMA, so it belongs in a clean panel, not out on a washdown floor.
Frame size R7 tells you the physical footprint and the bus-bar layout. If you're swapping into an existing cabinet, measure the mounting hole pattern and the gland-plate area — R7 is a specific bolt pattern that won't match R6 or R8. Light-overload rating matches the normal-duty figure at 110 kW (113 A), so if your load profile is mostly steady-state with short peaks, you don't lose headroom. Heavy-duty is the tighter number for applications that cycle hard.