The ABB 3ABD00059671-D is an ACS880-01 wall-mounted single drive rated for 250 kW normal use output power at 271 A, with a heavy-duty rating of 200 kW at 210 A. It accepts 525 to 690 V three-phase input and includes position control capability, making it a fit for applications that need coordinated motion or precise stopping without a separate motion controller.
The normal-use current of 271 A is the figure to size branch protection and cabling for continuous duty. The heavy-duty current of 210 A governs applications with high starting torque or cyclic overloads — a 200 kW motor on a crusher or extruder, for example. Light-overload use at 257 A sits between the two, for loads that occasionally exceed normal but don't reach heavy-duty profile. Input voltage of 525 to 690 V covers 575 V and 600 V North American grids, as well as 690 V European industrial supplies. The 48 to 63 Hz frequency acceptance means it's grid-agnostic between 50 Hz and 60 Hz regions.
Wall-mounted in Frame R9 — plan for a reinforced backplate or Unistrut; this is not a DIN-rail unit. The IP21 enclosure allows top-entry conduit or cable glands; maintain the minimum clearance around the heat sink per the installation manual to avoid thermal derating. Position control is built in, so if you're replacing a drive that relied on an external encoder feedback card, this one handles it on-board. Verify the motor feedback interface matches your encoder type before committing the BOM.