The ABB 3ABD00061581-D is an ACM510-01S-033A-4 drive rated for 15 kW normal-use output at 32 A on a 380-480 V three-phase supply. Light-overload duty holds at 15.0 kW and 30.4 A — enough headroom for constant-torque loads like conveyors or screw feeders without oversizing the frame. Frame R3 keeps the panel footprint manageable, and the IP20 open-type enclosure suits a clean indoor cabinet; it's not meant for washdown zones or dusty lube bays.
The 32 A normal-use current (In) is the number to match against your motor nameplate FLA for continuous-duty applications. The light-overload curve at 30.4 A covers the same power but with a slightly lower current limit — useful if you're running a 15 kW motor on a pump or fan where the load profile stays below 110% of rated. IE2 efficiency is the baseline for this class; nothing exotic, but it meets the minimum for most industrial installations. Frequency acceptance from 47.5 to 63 Hz means it handles both 50 Hz and 60 Hz grids without a firmware change.