What it is
The ABB 3ADT209013R0003 is a 30 A converter from the ABB drive family, classified under Motor Drives within the broader Motors & Motor Controls heading. The listing carries the description CONVERTER 30 AMP by ASEA BROWN BOVERI, placing it on the legacy ABB/ASEA naming track rather than the current ACS-series commercial branding.
Sizing the unit and the panel slot it needs
At 20.41 kg, the unit sits in the bracket where a two-person lift and cabinet bracing are the realistic handling posture rather than a bench swap. For a panel builder that weight is a cabinet-floor or backplane-mount question, not a DIN-rail clip — confirm the existing enclosure's load rating before specifying the cut-out.
Where the class sits in a controls cabinet
Motor drive converters in this class feed the line contactor or motor feeder circuit downstream of the main disconnect, and they typically sit adjacent to the braking resistor or EMC filter stage to keep the DC-link and switching loop lengths short.
Same-class ABB drive peers on file
Three ACS-series ABB drives sit on file in the same Motor Drives class: ACS550-U1-096A-4 at 19.96 kg, ACS580-01-065A-4 at 19.05 kg, and ACS880-01-040A-5 at 18.14 kg. They are same-family ABB drives in the same category bracket, but a direct drop-in swap is not asserted here — frame, current rating class, and control terminal mapping would need verification against the panel drawings before any of them could replace 3ADT209013R0003 on a running line.