Skip to main content
Log in
ABB 3AXD50000031872 — AC Drive (VFD) 240V

ABB 3AXD50000031872 Micro Drive, 0.37 kW, 2.4 A

MPN3AXD50000031872
Active

ABB, micro drive, 3AXD50000031872, 0.37 kW / 2.4 A normal use, 200-240 V 1-phase, MODBUS, IP20, frame R0.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3AXD50000031872 — Electrical Output
ParameterValue
Output power, normal duty (Pn)0.37 kW
Output current, normal duty (In)2.4 A
Output power, heavy duty (PhD)0.25 kW
Output current, heavy duty (IhD)1.8 A
Output power, light-overload duty (PlD)0.37 kW
Output current, light-overload duty (IlD)2.3 A
Output power, heavy duty (UL, Hp)0.33 Hp
Output current, heavy duty (UL)1.8 A
Apparent power output1.0 kV·A
Output power, light-overload duty (UL, Hp)0.5 Hp
Efficiency class (IE)IE2
Output current, light-overload duty (UL)2.3 A
Standby loss9 W
Power consumption33 W
3AXD50000031872 — Electrical Input
ParameterValue
Input voltage range200 ... 240 V
Number of phases1-phase
Frequency47.5 ... 63 Hz
Power factor0.98
3AXD50000031872 — Control & I/O
ParameterValue
Digital inputs / outputs5 / 2
Communication protocolMODBUS
Analog inputs2
Analog outputs1
Hardware interfacesIndustrial Ethernet 0
3AXD50000031872 — Environmental
ParameterValue
Operating humidity5 ... 95
Altitude1000 m
Noise level< 30 dB(A)
3AXD50000031872 — Mechanical
ParameterValue
Degree of protection (IP)IP20
Enclosure type (NEMA)Open Type
Frame sizeR0
Mounting typeModule
3AXD50000031872 — Approvals
ParameterValue
RoHS complianceFollowing EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
REACH complianceTrue - contains substances > 0.1 mass percentage

Product details

The ABB 3AXD50000031872 is a micro drive rated 0.37 kW output power and 2.4 A output current in normal (light-overload) use, fed from a 200-240 V single-phase supply. Frame size R0, IP20 enclosure, MODBUS on board. Current lifecycle stage — no phase-out signal.

Normal-use output is 0.37 kW / 2.4 A; heavy-duty use drops to 0.25 kW / 1.8 A. Light-overload use matches the normal-use current at 2.3 A, so the drive carries the same rating for standard variable-torque loads like fans and pumps. Standby loss is 9 W, efficiency class IE2. The 1-phase input means this drive is outside the EU ecodesign scope (Regulation EU/2019/1781) — no efficiency data required, but the IE2 label still gives a benchmark for panel heat budgeting.

Two analog inputs, one analog output. Five digital inputs, two digital outputs. MODBUS RTU on the serial port — no Ethernet interface on this variant. For a simple pump/fan or conveyor drive that only needs speed reference and run/stop, the onboard I/O covers it without an extra module.

No battery included, WEEE category 5 (small equipment). Ambient conditions: 1000 m altitude, 5-95 % RH, sound pressure under 30 dB(A).

Frequently asked questions

What are the key ratings for this drive?

0.37 kW / 2.4 A normal use, 0.25 kW / 1.8 A heavy-duty use, 200-240 V single-phase input, MODBUS, IP20, frame R0.

What compliance documentation is available?

RoHS (EU 2011/65/EU), REACH (substances >0.1%), UL listing for both heavy-duty and light-overload ratings, and SCIP number 95c36880-8808-44ac-9b41-f52d79a2df56 Finland.

What is the SCIP number?

95c36880-8808-44ac-9b41-f52d79a2df56 Finland.

What is the maximum operating altitude?

1000 m.

MPN
3AXD50000031872