Skip to main content
Log in
ABB 3AXD50000031882 — AC Drive (VFD) 240V

ABB 3AXD50000031882 AC Drive, 1.1 kW, 6.9 A, IP20

MPN3AXD50000031882
Active

ABB AC drive, frame size R1, 1-phase 200-240 VAC input, 1.1 kW / 6.9 A normal use, IP20, MODBUS, includes control unit.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3AXD50000031882 — Electrical Output
ParameterValue
Output power, normal duty (Pn)1.1 kW
Output current, normal duty (In)6.9 A
Output power, heavy duty (PhD)0.75 kW
Output current, heavy duty (IhD)4.8 A
Output power, light-overload duty (PlD)1.1 kW
Output current, light-overload duty (IlD)6.6 A
Output power, heavy duty (UL, Hp)1 Hp
Output current, heavy duty (UL)4.6 A
Apparent power output2.7 kV·A
Output power, light-overload duty (UL, Hp)1.5 Hp
Efficiency class (IE)IE2
Output current, light-overload duty (UL)6.6 A
Standby loss15 W
Power consumption93 W
3AXD50000031882 — Electrical Input
ParameterValue
Input voltage range200 ... 240 V
Number of phases1-phase
Frequency47.5 ... 63 Hz
Power factor0.98
3AXD50000031882 — Control & I/O
ParameterValue
Digital inputs / outputs5 / 2
Communication protocolMODBUS
Analog inputs2
Analog outputs1
Hardware interfacesIndustrial Ethernet 0
3AXD50000031882 — Environmental
ParameterValue
Operating humidity5 ... 95
Altitude1000 m
Noise level63.10 dB(A)
3AXD50000031882 — Mechanical
ParameterValue
Degree of protection (IP)IP20
Enclosure type (NEMA)Open Type
Frame sizeR1
Mounting typeModule
3AXD50000031882 — Approvals
ParameterValue
RoHS complianceFollowing EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
REACH complianceTrue - contains substances > 0.1 mass percentage

Product details

The ABB 3AXD50000031882 is an AC drive in frame size R1, built for single-phase 200-240 VAC input. It delivers 1.1 kW at 6.9 A in normal use, or 0.75 kW at 4.8 A under heavy-duty cycling. The unit includes the control module and communicates over MODBUS.

The normal-use output (6.9 A, 1.1 kW) covers constant-torque loads like fans and pumps. Light-overload use sits at 6.6 A, 1.1 kW — a middle ground that matches the normal-use power but with slightly less current headroom. The UL listings track the same pattern: 1 Hp heavy-duty, 1.5 Hp light-overload.

The drive carries 2 analog inputs and 1 analog output, plus 5 digital inputs and 2 digital outputs. MODBUS is the onboard protocol — no Industrial Ethernet interface. The control unit is included, so no separate ordering for the brain of the drive.

Physical and environmental

IP20 enclosure, so it belongs in a clean panel, not on the plant floor. Rated for operation up to 1000 m altitude without derating. Sound level is 63.1 dB(A) — noticeable but not deafening in a cabinet row. The standby loss of 15 W and full-load consumption of 93 W matter for thermal budgeting in a sealed enclosure. The frame R1 footprint is compact; verify DIN-rail or screw-mount compatibility with your panel layout.

Frequently asked questions

What is the normal-use output rating?

1.1 kW at 6.9 A. Heavy-duty use is 0.75 kW at 4.8 A.

What input voltage and phases does it require?

Single-phase 200-240 VAC.

What communication protocol does it support?

MODBUS. No Industrial Ethernet interface.

What is the SCIP number?

f6b93a8d-6417-467a-ab46-ab84c651c968 Finland.

What compliance documentation is available?

RoHS compliant per EU Directive 2011/65/EU and amendment 2015/863. REACH registered (contains substances > 0.1 %). UL technical data is provided for heavy-duty and light-overload use.

MPN
3AXD50000031882