Skip to main content
Log in
ABB 3AXD50000031883 — AC Drive (VFD) 240V

ABB 3AXD50000031883 VFD, 1.5 kW, 7.8 A, Frame R1

MPN3AXD50000031883
Active

ABB, variable frequency drive, 3AXD50000031883, 1-phase 200–240 VAC input, 1.5 kW normal-use output, 7.8 A, Frame R1, IP20, MODBUS.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3AXD50000031883 — Electrical Output
ParameterValue
Output power, normal duty (Pn)1.5 kW
Output current, normal duty (In)7.8 A
Output power, heavy duty (PhD)1.1 kW
Output current, heavy duty (IhD)6.9 A
Output power, light-overload duty (PlD)1.5 kW
Output current, light-overload duty (IlD)7.4 A
Output power, heavy duty (UL, Hp)1.5 Hp
Output current, heavy duty (UL)6.6 A
Apparent power output3.1 kV·A
Output power, light-overload duty (UL, Hp)2 Hp
Efficiency class (IE)IE2
Output current, light-overload duty (UL)7.5 A
Standby loss15 W
Power consumption106 W
3AXD50000031883 — Electrical Input
ParameterValue
Input voltage range200 ... 240 V
Number of phases1-phase
Frequency47.5 ... 63 Hz
Power factor0.98
3AXD50000031883 — Control & I/O
ParameterValue
Digital inputs / outputs5 / 2
Communication protocolMODBUS
Analog inputs2
Analog outputs1
Hardware interfacesIndustrial Ethernet 0
3AXD50000031883 — Environmental
ParameterValue
Operating humidity5 ... 95
Altitude1000 m
Noise level63.10 dB(A)
3AXD50000031883 — Mechanical
ParameterValue
Degree of protection (IP)IP20
Enclosure type (NEMA)Open Type
Frame sizeR1
Mounting typeModule
3AXD50000031883 — Approvals
ParameterValue
RoHS complianceFollowing EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
REACH complianceTrue - contains substances > 0.1 mass percentage

Product details

The 3AXD50000031883: Normal-use output (Pn) of 1.5 kW at 7.8 A covers most constant-torque applications up to a standard 2 HP motor. Heavy-duty (PhD) 1.1 kW / 6.9 A is the rating for higher starting torque or cyclic loads — size against IhD if the application requires sustained overload capacity. Light-overload (PlD) 1.5 kW / 7.4 A matches normal use but with a slightly lower current ceiling; it is the same power rating at a softer current limit. The UL column gives 1.5 HP heavy-duty and 2 HP light-overload for North American motor frames.

Frame R1 is the smallest in the family. IP20 — open type, no gaskets; install in a clean, dry cabinet. Operating humidity 5–95% non-condensing. Altitude rated to 1000 m without derating. Two analog inputs and one analog output on board. The control unit is included in the package.

Frequently asked questions

What is the SCIP number for this drive?

The SCIP number is f6b93a8d-6417-467a-ab46-ab84c651c968 Finland.

What is the altitude rating?

Rated for operation up to 1000 m without derating.

What compliance documentation is available?

RoHS dated 2023-03-03 per EU Directive 2011/65/EU, REACH dated 2025-09-05 (substances >0.1% present), SCIP f6b93a8d-6417-467a-ab46-ab84c651c968, and UL ratings for heavy-duty (1.5 HP, 6.6 A) and light-overload (2 HP, 7.5 A).

MPN
3AXD50000031883