The ABB 3AXD50000036399 is a low-voltage AC machinery drive module for 3-phase 200-240 V input. It delivers 22 kW / 94 A in normal use and 18.5 kW / 75 A in heavy-duty use. The R4 frame and IP20 enclosure suit panel mounting in a clean cabinet.
Normal-use output of 22 kW / 94 A is the number you spec for a motor that runs steady, not peaking hard. Heavy-duty drops to 18.5 kW / 75 A — that's your headroom for a crusher or a saw that pulls extra when it bites in. The 37 kV·A apparent power rating backs up the 94 A output, so the drive can handle the inrush without sagging. Input voltage range of 200-240 V covers common North American and European low-voltage feeds. Altitude rating of 1000 m is standard; above that you'll need to derate the current. Ambient max of 40 °C is typical for a ventilated cabinet; push past that and the drive starts throttling back.
This is a machinery drive module — it lives inside a panel, bolted to a backplate or DIN rail via the R4 frame. The 6 digital inputs and 5 digital outputs give you basic start/stop, fault reset, and status feedback without an extra I/O block. Two analog inputs and two analog outputs handle speed reference and actual-value signalling. CAN communication is onboard for drive-to-drive linking or a simple fieldbus; no Ethernet port here, so if you need PROFINET or EtherNet/IP, you'll add an option module. The IP20 rating means no washdowns — keep it behind a closed cabinet door.