3AXD50000110384 ABB ACS580 drive, 3 kW, 12.2 A, R2 frame

Specifications

Electrical Output

3AXD50000110384 — Electrical Output
Parameter	Value
Output power, normal duty (Pn)	3 kW
Output current, normal duty (In)	12.2 A
Output power, heavy duty (PhD)	2.2 kW
Output current, heavy duty (IhD)	9.8 A
Output power, light-overload duty (PlD)	3.0 kW
Output current, light-overload duty (IlD)	11.6 A
Output power, heavy duty (UL, Hp)	3 Hp
Output current, heavy duty (UL)	9.3 A
Apparent power output	4.9 kV·A
Output power, light-overload duty (UL, Hp)	3 Hp
Efficiency class (IE)	IE2
Output current, light-overload duty (UL)	11.6 A
Standby loss	15 W
Power consumption	149 W

Electrical Input

3AXD50000110384 — Electrical Input
Parameter	Value
Input voltage range	200 ... 240 V
Number of phases	3-phase
Frequency	47.5 ... 63 Hz
Power factor	0.98

Control & I/O

3AXD50000110384 — Control & I/O
Parameter	Value
Digital inputs / outputs	2 / 1
Communication protocol	CAN
Analog inputs	0
Analog outputs	0
Hardware interfaces	Industrial Ethernet 0

Environmental

3AXD50000110384 — Environmental
Parameter	Value
Temperature rating, max.	Maximum 50 °C
Operating humidity	5 ... 95
Altitude	1000 m
Noise level	58.80 dB(A)

Mechanical

3AXD50000110384 — Mechanical
Parameter	Value
Degree of protection (IP)	IP20
Enclosure type (NEMA)	Open Type
Frame size	R2
Mounting type	Module

Approvals

3AXD50000110384 — Approvals
Parameter	Value
RoHS compliance	Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
REACH compliance	True - contains substances > 0.1 mass percentage

Product details

The 3AXD50000110384: Input voltage is 200–240 VAC three-phase at 47.5–63 Hz, so it fits standard North American and global low-voltage grids. The IP20 open-type enclosure means it belongs in a cabinet — no washdown environments. Maximum ambient 50 °C, altitude 1000 m without derating; above that you'll need to reduce output current per the drive manual.

Built-in I/O and fieldbus — what you get on the terminal block

Two digital inputs and one digital output are onboard — enough for a basic start/stop and a fault relay, but not for multi-sensor feedback. No analog I/O, so any process setpoint must come via the CAN fieldbus. The drive speaks CAN as standard; if your network is PROFINET or EtherNet/IP, you'll need an optional fieldbus adapter module that slots into the drive's expansion bay.

Frequently asked questions

What is the SCIP number for this drive?

The SCIP number is 171cbe90-f958-4bba-b9dd-e62c0f6b4011 Finland.

What compliance documentation is available?

RoHS (2011/65/EU, date 20230303) and REACH (date 20250905) declarations are on file. UL listing covers heavy-duty and light-overload ratings. WEEE category 5 applies.

What are the key output ratings?

Normal-duty (light-overload): 3 kW, 11.6 A. Heavy-duty: 2.2 kW, 9.8 A. UL heavy-duty: 3 HP, 9.3 A.

What communication protocol does it support?

Standard CAN fieldbus. No onboard Ethernet; an optional adapter is required for PROFINET or EtherNet/IP.