The ABB 3AXD50000145973 is rated for 2200 kW normal-use output power and 2230 A normal-use output current on a 525 to 690 V three-phase supply. It is a frame 4xR8i+4xR8i unit with the control module included, built for applications that need to feed regenerated energy back into the line rather than dump it across a brake resistor.
Normal-use output current is 2230 A, with a corresponding heavy-duty rating of 1668 A and a light-overload rating of 2141 A. The heavy-duty figure governs continuous motor load in a constant-torque application; the light-overload figure covers variable-torque loads like pumps and fans where occasional overload is expected. Apparent power output sits at 2665 kV·A, which gives you the transformer or generator sizing number for the line side. Input voltage range is 525 to 690 V AC, three-phase, 48 to 63 Hz. Maximum ambient temperature is 40 °C, altitude 1000 m without derating.
The drive carries 4 analog inputs and 4 analog outputs, plus 14 digital I/O and 10 digital outputs. The battery pack is two BR2032 lithium coins, 3 V each, 200 mAh — keep spares on the shelf for the control board memory backup.
Regulatory notes
The SCIP number is 944D8A5E-036D-404E-9036-0D3C1EA703AD Finland, which is the EU waste framework declaration for the article. WEEE category is 4 (Large Equipment). The regenerative design is exempt from EU ecodesign efficiency requirements under Regulation EU/2019/1781 §2.3.c, so no energy-efficiency class is published for this drive.