The ABB 3AXD50000162123 is a current-production drive module in the R1 frame size, rated for 3-phase 200…240 V input. Normal-use output is 2.2 kW at 9.8 A; heavy-duty use derates to 1.5 kW at 7.8 A. Light-overload use matches normal-use power at 2.2 kW but draws 9.3 A. The unit includes the control unit, communicates over CAN, and is rated IP20 for panel-mount environments.
The normal-use output current of 9.8 A is the figure to size motor protection and cabling for continuous duty. Heavy-duty use at 7.8 A applies for applications requiring higher torque at low speed or frequent starts — the 1.5 kW power limit reflects that thermal headroom. Light-overload use at 9.3 A sits between normal and heavy-duty for intermittent overload profiles. The 0.98 power factor and 140 W power consumption give the panel designer the numbers for upstream transformer and cooling sizing. Standby loss of 15 W matters for systems that idle for long periods — it's the heat the enclosure must shed even when the drive isn't running a load.
Current-production part. The R1 frame and CAN interface are stable.