The ABB 3AXD50000268757 is a wall-mounted drive built for water and wastewater duty. It runs on 208... 240 V three-phase, delivers 1.5 Hp and 6.6 A under light-overload use, and carries an IP55 Type 12 enclosure.
The 6.6 A light-overload figure (PlD) is the continuous rating that governs motor sizing — it's not a peak or surge number. That 1.5 Hp output at 208-240 V matches a standard 1.5 Hp 3-phase motor; if your load profile is heavier or the ambient pushes past 40 °C, you'll need to derate or step up a frame. Standby loss of 13 W is the heat the drive dumps into the panel when it's idling — relevant for enclosure thermal calculations if you're stacking multiple units. IP55 and NEMA Type 12 mean the drive handles direct hose spray and settling dust without an extra enclosure. That's the main reason you'd pick this over a standard IP20 drive in a water/wastewater setting — it saves a cabinet and the associated plumbing for cooling.