The ABB 3AXD50000296828 is an ACH580-01 wall-mounted HVAC drive rated for 114 A continuous output on a 208 to 240 V three-phase supply. It delivers 45 kV·A apparent power and supports a light-overload rating of 40 Hp, making it a fit for medium-sized fan, pump, and compressor loads in commercial building HVAC systems. Housed in a Frame R5 enclosure with IP55 protection and NEMA Type 12 rating, it is suited for installation in indoor environments where dust and splash resistance are needed — mechanical rooms, rooftop units, or plant-floor equipment alcoves.
The 40 Hp light-overload figure (PlD) tells you the drive can handle 110% overload for 60 seconds — enough for fan inertia starts but not for high-breakaway loads like a loaded conveyor. If your motor nameplate exceeds 40 Hp at 208-240 V, step up to the next frame. Standby loss of 19 W matters for energy-code compliance (ASHRAE 90.1, EN 50598) when the drive is idle but powered. It is not a selection parameter for motor sizing, but it factors into the total heat load for the enclosure ventilation.
Wall-mounting only — no flange or through-panel kit in this order code. The IP55 / NEMA Type 12 enclosure means it can be mounted directly on a wall without a separate cabinet, but the ambient temperature must stay at or below 40 °C. Above that, derate the output current per the drive's thermal curve.