Drive rating and duty selection
The ABB 3AXD50000417452 is the ACS580-01-144A-2, a general-purpose wall-mounted drive rated for 37 kW normal-use output at 144 A on a 200...240 V three-phase supply. Heavy-duty use drops to 30.0 kW at 114 A, while light-overload use holds at 37 kW with 143 A — the normal and light-overload curves overlap, so the heavy-duty figure is the one that governs for constant-torque loads like conveyors or positive-displacement pumps. Apparent power output sits at 57 kV·A, and standby loss is 22 W — relevant for panel heat budgeting when the drive is idle but powered. Efficiency class is IE2, in line with the current EU Ecodesign requirements for this power band.
Frame size R6, wall-mounted, IP21 with NEMA Type 1 enclosure. Ambient temperature max 40 °C, altitude 1000 m without derating; above that, standard drive derating applies. Operating humidity 5...95% RH non-condensing. Sound level is 67 dB(A) — noticeable in a quiet control room but typical for an R6 frame at full load. The drive includes the control unit, so no separate controller module to order.
Onboard I/O: 2 analog inputs, 2 analog outputs, 6 digital inputs, 3 digital outputs. Communication is via CAN; there are no industrial Ethernet interfaces built in — if you need PROFINET or EtherNet/IP, that requires an optional fieldbus adapter module. The lithium coin cell (CR2032, 220 mAh) keeps the real-time clock and parameter backup alive during power-down.