The ABB 3AXD50000417537 is an ACS580-01-018A-2+B056 general-purpose wall-mounted drive rated for 4 kW normal-use output at 16.9 A on a 200-240 V three-phase supply. Heavy-duty use drops to 3.0 kW and 10.6 A, so the normal-use figure governs the motor sizing for most constant-torque loads; the heavy-duty curve applies when ambient temperature or duty cycle pushes the thermal limit. The R1 frame size and IP55 enclosure with NEMA Type 12 rating mean this drive mounts directly on a wall or machine frame in dusty, washdown-adjacent environments — no separate cabinet needed for most food-and-bev or light industrial lines. Standby loss of 13 W keeps the panel heat load low when the motor is stopped.
The drive carries 2 analog inputs, 2 analog outputs, and 6 digital inputs / 3 digital outputs — enough for basic speed reference, feedback, and start/stop control without an expansion module. Communication is CAN-based; there is no onboard industrial Ethernet port, so if the line uses PROFINET or EtherNet/IP, plan for an optional fieldbus adapter.