The ABB 3AXD50000417711 is a factory-matched order code for the ACH580-01-047A-2, a low-voltage AC wall-mounted drive built for HVAC applications. It delivers 11 kW normal-duty output at 47 A from a 200...240 V three-phase supply, with heavy-duty capability rated at 7.5 kW and 30.8 A for more demanding fan or pump loads. The drive includes the control unit, mounts on a wall in frame size R3, and carries IP21 protection with a NEMA Type 1 enclosure.
The normal-duty output current of 47 A (light-overload 46.2 A) is the figure to size branch protection and cabling for continuous fan or pump duty. Heavy-duty use at 30.8 A applies when the load profile includes higher starting torque or frequent acceleration — common on cooling towers or variable-torque centrifugal machines. Standby loss of 15 W and sound pressure of 76 dB(A) are within expected range for an R3 frame drive at this power level.
Integration and commissioning
BACnet communication is built in, so the drive connects directly to building management systems without an external gateway. The two analog inputs and two analog outputs handle standard 0–10 V or 4–20 mA setpoint and feedback signals; the six digital inputs and three relay outputs cover start/stop, fault reset, and status indication. Input frequency range of 47.5...63 Hz covers 50 Hz and 60 Hz mains. Maximum operating temperature is 40 °C, and the drive is rated for installation up to 1000 m altitude without derating.