ABB 3AXD50000417810 ACH580 HVAC Drive, 1.5 kW, 7.6 A

Specifications

Electrical Output

3AXD50000417810 — Electrical Output
Parameter	Value
Output power, normal duty (Pn)	1.5 kW
Output current, normal duty (In)	7.6 A
Output power, heavy duty (PhD)	1.1 kW
Output current, heavy duty (IhD)	6.6 A
Output power, light-overload duty (PlD)	1.5 kW
Output current, light-overload duty (IlD)	7.5 A
Apparent power output	3.0 kV·A
Efficiency class (IE)	IE2
Standby loss	13 W
Power consumption	82 W

Electrical Input

3AXD50000417810 — Electrical Input
Parameter	Value
Input voltage range	200 ... 240 V
Number of phases	3-phase
Frequency	47.5 ... 63 Hz

Control & I/O

3AXD50000417810 — Control & I/O
Parameter	Value
Digital inputs / outputs	6 / 3
Communication protocol	BACNET
Analog inputs	2
Analog outputs	2
Hardware interfaces	Industrial Ethernet 0

Environmental

3AXD50000417810 — Environmental
Parameter	Value
Temperature rating, max.	Maximum 40 °C
Operating humidity	95

Mechanical

3AXD50000417810 — Mechanical
Parameter	Value
Degree of protection (IP)	IP55
Enclosure type (NEMA)	Type12
Frame size	R1
Mounting type	Wall-mounted

Approvals

3AXD50000417810 — Approvals
Parameter	Value
RoHS compliance	Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
REACH compliance	True - contains substances > 0.1 mass percentage

Product details

The 3AXD50000417810: BACnet MS/TP is the onboard protocol, with two analog inputs and two analog outputs for sensor feedback or setpoint control. No industrial Ethernet port here — this is a pure BACnet drive for BMS integration. Enclosure is IP55 / NEMA 12, so it handles hose-down washdown and dusty plant floors. Ambient limit is 40 °C, which covers most mechanical rooms but derate if the panel sits in a hot attic.

Duty ratings — normal, heavy, light

Three output current curves cover the load profile: normal use 7.6 A (1.5 kW), heavy-duty 6.6 A (1.1 kW), and light-overload 7.5 A (1.5 kW).

Lifecycle status is active — no end-of-life notice, no last-time-buy pressure. RoHS compliance dated 2024-05-08 and REACH compliance dated 2025-09-05 are on file. The SCIP number (12216470-2923-46fb-9b3c-c7084d490da0 Finland) is registered for EU waste reporting.

I/O and auxiliaries

Six digital inputs and three digital outputs cover start/stop, fault reset, and status feedback for a typical fan or pump. The onboard lithium coin cell (CR2032, 220 mAh) keeps the real-time clock alive through power loss. Standby loss is 13 W; full-load power consumption is 82 W.

Frequently asked questions

What compliance documentation is available for this drive?

RoHS compliance dated 2024-05-08 and REACH compliance dated 2025-09-05 are on file. The SCIP number 12216470-2923-46fb-9b3c-c7084d490da0 Finland is registered for EU waste reporting.

What are the key ratings for normal and heavy-duty use?

Normal use: 1.5 kW at 7.6 A. Heavy-duty: 1.1 kW at 6.6 A. Light-overload: 1.5 kW at 7.5 A.

Does this drive include the control unit?

Yes, it ships with the control unit included — no separate ordering needed.