It delivers 15 kW output power at 60 A normal use on a 200-240 V three-phase supply, with the frequency range covering 47.5 to 63 Hz. The drive includes its control unit, so it arrives ready for commissioning.
Duty ratings and real-world loading
For heavy-duty cycles — pumps, fans with high starting torque — the drive is rated 11.0 kW at 46 A. Light-overload use stays at 15.0 kW, pulling 59 A. The 15 W standby loss is worth noting for energy-conscious installations; it keeps the idle draw low when the fan or pump is off.
IP55 and NEMA Type 12 enclosure means this drive handles dust and hose-down cleaning — typical for HVAC plant rooms, rooftop units, or washdown areas. Ambient temperature max is 40 °C, with 95% RH non-condensing. The R3 frame size is wall-mounted, so plan for backplate clearance and cable entry from below.
Control and I/O
Built-in BACnet communication makes it a direct fit for building management systems — no gateway needed. It carries 2 analog inputs, 2 analog outputs, and 6 digital inputs with 3 digital outputs, enough for basic feedback and start/stop control without an expansion module.