The ABB 3AXD50000417957 is an ACQ580-01 wall-mounted drive sized for a 1.1 kW motor on 200-240 V three-phase supply. Normal-use output current is 6.7 A; heavy-duty use drops to 0.75 kW and 4.6 A for constant-torque loads like conveyors or positive-displacement pumps. Light-overload use (variable-torque, e.g. centrifugal pumps and fans) holds at 1.1 kW and 6.6 A. The drive includes the control unit, so no separate controller module is needed.
Two analog inputs and two analog outputs are available for process signals — typical for a water/wastewater drive reading pressure or flow transducers. Six digital inputs and three digital outputs handle start/stop, fault reset, and status feedback. Communication is CAN-based; there is no onboard industrial Ethernet port, so if your network requires PROFINET or EtherNet/IP, plan for an optional fieldbus adapter module. The control board uses a CR2032 lithium coin cell for real-time clock backup.
Frame size R1, wall-mounted. Enclosure is IP21 / NEMA Type 1 — suitable for indoor, non-condensing environments. Maximum ambient temperature is 40 °C; derate above that. Operating humidity range 5-95% non-condensing. Altitude rating goes to 4000 m, which covers most high-altitude installations without additional derating. Sound level is 59 dB(A) — quiet enough for a pump room but not silent. Standby loss is 13 W, so the drive draws minimal power when the motor is stopped.