The ABB 3AXD50000417964 is an ACQ580-01 wall-mounted drive rated for 1.5 kW normal-use output (Pn) at 7.6 A (In) on a 200-240 V three-phase supply. Light-overload (PlD) matches the normal-use power at 1.5 kW but current is 7.5 A (IlD), a minor derating from the normal-use figure.
IP21 / NEMA 1 enclosure suits indoor, dry-location installations — clean water treatment rooms or protected MCC areas, not washdown zones. Wall-mounted with the control unit included; no separate control panel to order. Ambient temperature max 40 °C and altitude rated to 4000 m, so it handles high-altitude pump stations without derating below that ceiling. Operating humidity 5-95% RH non-condensing covers most indoor environments.
6 digital inputs and 3 digital outputs handle start/stop, fault reset, and speed reference selection. 2 analog inputs and 2 analog outputs support 4-20 mA transducer feedback or setpoint from a PLC. Communication is CAN-based — no onboard Ethernet; the 0 hardware interfaces for Industrial Ethernet mean a fieldbus adapter is needed for PROFINET or EtherNet/IP networks.
Efficiency and losses
IE2 efficiency level is the standard for this class. Standby loss of 13 W and power consumption of 82 W (Pcons) give a reasonable idle draw for a 1.5 kW drive. Power factor of 0.98 at rated load keeps line current in check. Sound level 59 dB(A) — quiet enough for a pump room but not silent.