Drive module for high-power cabinet builds
The ABB 3AXD50000448524 is an ACS880-04 drive module rated for 1400 kW normal-duty output at 1450 A, fed from a 525 to 690 V three-phase supply at 50/60 Hz. This is the cabinet-building variant — IP00 open type, no enclosure — sized for integration into a larger panel where the installer provides the gland plate, buswork, and cooling. The heavy-duty rating comes in at 1000 kW and 1085 A, and the light-overload rating at 1250 kW and 1392 A, so the normal-duty figure governs continuous conveyor or pump loads, while the heavy-duty rating covers the peak torque demand on a crusher or extruder start.
The 525 to 690 V input range covers 690 V class motors common in European and marine installations; at the low end, 525 V still delivers full rated current, so derating only kicks in if the supply voltage drops below that threshold.
Listed as a module for cabinet building, this drive ships as an open chassis — no cover, no IP rating beyond IP00. The panel builder provides the enclosure, the main disconnect, the input fusing, and the cooling airflow. At 1400 kW output, expect busbar connections rather than cable lugs on the power terminals, and plan for forced-air or liquid cooling depending on the cabinet design.