This ABB 3AXD50000462445 is the ACS580-0P-088A-2 — an LV AC packaged drive with a built-in disconnect means, sized for a 30 Hp motor under light-overload use at 240 V three-phase. It pulls 88 A continuous in that light-duty profile, or 74.8 A / 25 Hp if the load is heavy-duty. Frame R5 keeps the enclosure compact for a 30 Hp class, and the NEMA Type 1 / IP21 rating means it's fine for a dry indoor panel — not washdown, not outdoors. It runs on 50 or 60 Hz without a tweak.
The light-overload rating (30 Hp, 88 A) is the one you'll use for a fan or pump that doesn't hammer the drive with peak torque every cycle. Heavy-duty (25 Hp, 74.8 A) covers conveyors, crushers, or any constant-torque start-stop application. Both are UL-listed at 240 V input, so for a 208 V service the current capacity stays the same but the horsepower figure derates slightly — the drive still delivers the amps, just not the same shaft power. The 50/60 Hz label is standard; no derating needed between the two.