The 3AXD50000466078 is an ABB ACQ580-PD packaged drive — a LV AC drive with integrated disconnect and fuses, ready for panel-less mounting. It accepts 208-240 V three-phase input at 50/60 Hz and delivers 2 Hp UL light-overload output at 6.6 A. The IP55 and NEMA Type12 enclosure means it stands up to dust and hose-down in a washdown or light-industrial environment without an extra cabinet.
The 2 Hp UL light-overload (6.6 A) rating is the continuous-duty limit for a 460 V motor under UL listing. If your motor nameplate exceeds that current at the applied voltage, step up to the next frame. Light-overload (Class 10) suits variable-torque loads like fans and pumps; for constant-torque or high-starting-torque applications, verify the drive's overload profile against your load cycle. The 208-240 V three-phase input range covers common North American and global low-voltage grids. The 50/60 Hz rating means it works on either frequency without derating — no need to specify a separate variant for 50 Hz vs 60 Hz sites. NEMA Type12 adds gasketing for indoor use where dust, falling dirt, and dripping non-corrosive liquids are present. Together they cover food processing lines, packaging cells, and light chemical areas — but not direct hose-down or outdoor exposure (for that, look for IP66 or NEMA 4X).
Because it's a packaged drive (disconnect and fuses integrated), it simplifies panel wiring and reduces component count. If you're holding a spare for a legacy line, this is the exact drop-in replacement for the same order code — no adaptation needed.