The 3AXD50000705993 is an ABB ACQ580-PC-017A-6+B058 low-voltage AC packaged drive — a VFD, circuit breaker, and fuse integrated into one enclosure. Input voltage range is 525 to 600 V three-phase at 50/60 Hz, so it lands on 480 V or 575 V industrial mains without a step-down transformer. UL light-overload rating is 15 Hp at 17 A; that 17 A figure is the continuous output current for the motor, not the input line draw.
NEMA Type 3R enclosure means it is rated for outdoor installation — rain-tight, sleet-resistant, but not submersible. The 525-600 V input range covers 575 V nominal (common in Canadian and some US industrial plants) and also 480 V at the high end, but verify the drive's voltage tolerance at 480 V: the lower bound is 525 V, so a 480 V supply may be out of range unless the drive accepts a lower voltage via parameter setting. The 17 A continuous output at 575 V drives a 15 Hp motor at light-overload duty; for heavier starting or cyclic loads, check the heavy-overload current rating (not listed here) to ensure the drive can deliver the motor's full-load amps without tripping.