The ABB 3AXD50000706419 is a low-voltage AC packaged drive from the ACQ580 series, integrating a circuit breaker and fuse in a single enclosure. It is a 3-phase unit rated for 208... 240 V input, delivering 163 A in light-overload use (UL) and 60 Hp output power. The drive is housed in an IP21, NEMA Type 1 enclosure, frame size R7, and operates on 50/60 Hz supply.
The 163 A light-overload rating (UL) is the figure that governs motor starting and overload cycles — it is the current the drive can sustain for a defined period above the base rating. For continuous-duty sizing, the 60 Hp output at 230 V class tells you the motor frame it pairs with. The IP21 and NEMA Type 1 enclosure means it is suited for indoor, non-condensing environments; no additional drip shield needed for clean panel areas. Frame size R7 sets the physical footprint and mounting pattern — confirm gland plate and backplane clearance against your panel layout before committing the BOM line. The integrated breaker and fuse simplify upstream protection coordination, but verify the breaker's interrupting rating against your available fault current.