The ABB 3AXD50000814114 is a drive module in frame size R2, rated for 4 kW normal-use output at 17.5 A on a 3-phase 200-240 V supply. It includes the control unit and communicates via MODBUS. The unit is IP20, open type per NEMA, and carries an IE2 efficiency level. Current lifecycle stage — no end-of-life notice on record.
Three duty ratings let you match the drive to the load profile. Normal use delivers 4 kW / 17.5 A continuous. Light-overload use stays at 4 kW / 16.7 A — the same power as normal but with a slightly lower current ceiling, suited for variable-torque loads such as fans or centrifugal pumps. The UL listing mirrors these: 4 Hp / 12.2 A for heavy duty, 5 Hp / 16.7 A for light overload.
The module carries 2 analog inputs and 1 analog output, plus 4 digital inputs and 2 digital outputs. No onboard industrial Ethernet port — communication is MODBUS only. The analog set is enough for a speed reference and feedback loop; the digital I/O covers start/stop, fault reset, and a run status. Power consumption is 198 W, with 9 W standby loss. Ambient temperature limit is 40 °C; altitude rating is 2000 m. Humidity range is 5-95% non-condensing.