The ABB 3AXD50000814268 is a drive module in the R3 frame size, delivering 5.5 kW of output power at 25.0 A in normal use — that's the continuous rating for a typical constant-torque load. For heavy-duty cycles — think crushers, conveyors, or extruders — it's rated 4 kW at 16.7 A. Light-overload use (pumps, fans) still hits 5.5 kW but at a slightly lower 24.2 A continuous. It runs on a 3-phase 200…240 V supply, 47…63 Hz, and hits 0.98 power factor. Efficiency is IE2, which is the baseline for this class — no surprises there. Communication is MODBUS via the built-in port — no Industrial Ethernet on this variant (0 hardware interfaces for that). It carries 4 digital inputs and 2 digital outputs, plus 2 analog inputs and 1 analog output. That's enough I/O for basic speed reference, start/stop, and fault feedback without an extra I/O module.
It's a module-style unit, IP20, so it's intended for inside a cabinet — not out in the grease. Ambient temp max is 40 °C; above that you'll need to derate. Mounting altitude is rated to 2000 m, which covers most sites without a second thought. The R3 frame is the physical envelope — make sure your backplate or DIN-rail layout has room for it before you cut holes.