What This Drive Carries
The ABB 3AXD50000822232 is an R2-frame variable frequency drive rated 3 kW normal-use output at 15.6 A—that's the number a controls integrator checks first to see if it matches a 3 kW motor nameplate. For heavy-duty loads (constant torque, conveyors, hoists), the rating drops to 2.2 kW and 9.3 A. Light-overload use (variable torque) stays at 3 kW but at 14.6 A, so the drive headroom shifts with duty. The input accepts 200-240 V three-phase, 47-63 Hz, and the 0.98 power factor keeps line draw clean. Standby loss holds at 9 W.
Frame R2 means a compact footprint that fits a shallow panel depth. IP20 rating covers indoor control cabinets; open-type NEMA enclosure leaves conduit entry and mounting to the installer. Mounts as a module with integral control unit—no separate controller board to order. Ambient temperature limited to 40 °C; derate above that per standard practice. Built-in MODBUS RTU on the standard hardware interfaces—no extra fieldbus card needed for basic networked setups. Analog I/O: 2 inputs, 1 output. Digital: 4 inputs, 2 outputs.
Compliance and Logistics
UL ratings documented: heavy-duty output 3 Hp at 10.7 A; light-overload 4 Hp at 14.6 A. SCIP number 40922a0b-ac0b-46c4-8517-b1d36d17a369 (Finland) is on file for EU waste reporting. Sound level 62 dB(A) at full fan speed—noise-conscious panels may want acoustic separation. Altitude rating 2000 m; above that, ambient temperature deration applies. No battery included—no hazmat classification for shipping. WEEE category 5 (small equipment under 50 cm) governs end-of-life disposal.