The ABB 3AXD50000827602 is a frame-R1 variable-frequency drive rated for 1.5 kW normal-use output at 7.8 A on a 200–240 V three-phase supply. It carries a 1.1 kW heavy-duty rating (6.6 A) and a light-overload rating of 1.5 kW (7.4 A). The enclosure is IP20, NEMA Open Type, and the unit includes the control module.
The normal-use current of 7.8 A is the figure to size motor protection against for continuous duty. Light-overload use (7.4 A) sits between the two; it matches the normal-use power (1.5 kW) but with a slightly lower current limit, so the drive can handle occasional overloads without tripping.
Communications and I/O
Modbus RTU is the onboard protocol — no industrial Ethernet interface (0 hardware interfaces for Ethernet). The drive provides 2 analog inputs and 1 analog output, plus 4 digital inputs and 2 digital outputs. That's enough for a basic speed-reference and run/stop scheme without an expansion module.
Environmental limits
Maximum ambient temperature is 40 °C, with operating humidity from 5 to 95 % RH (non-condensing). Altitude rating is 2000 m — above that, derate the output current per standard practice. Sound level at full load is 51.8 dB(A). Standby loss is 7 W; full-load power consumption is 63 W. Power factor is 0.98.