Skip to main content
Log in
ABB 3AXD50001002640 — AC Drive (VFD) 240V

ABB 3AXD50001002640 ACH580-01 Drive, 5.5 kW, 24.5 A, IP66

MPN3AXD50001002640
Active

ABB ACH580-01 HVAC drive, 3AXD50001002640, 5.5 kW / 7.5 Hp, 24.5 A, 200-240 V, IP66, BACnet, frame R2.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3AXD50001002640 — Electrical Output
ParameterValue
Output power, normal duty (Pn)5.5 kW
Output current, normal duty (In)24.5 A
Output power, heavy duty (PhD)4 kW
Output current, heavy duty (IhD)16.7 A
Output power, light-overload duty (PlD)5.5 kW
Output current, light-overload duty (IlD)24.2 A
Apparent power output9.8 kV·A
Output power, light-overload duty (UL, Hp)7.5 Hp
Efficiency class (IE)IE2
Output current, light-overload duty (UL)24 A
Standby loss14 W
3AXD50001002640 — Electrical Input
ParameterValue
Input voltage range200 ... 240 V
Number of phases3-phase
Frequency47.5 ... 63 Hz
Power factor0.98
3AXD50001002640 — Control & I/O
ParameterValue
Digital inputs / outputs6 / 3
Communication protocolBACNET
Analog inputs2
Analog outputs2
Hardware interfacesIndustrial Ethernet 0
3AXD50001002640 — Environmental
ParameterValue
Temperature rating, max.Maximum 40 °C
3AXD50001002640 — Mechanical
ParameterValue
Degree of protection (IP)IP66
Enclosure type (NEMA)Type4X
Frame sizeR2
Mounting typeWall-mounted

Product details

The 3AXD50001002640 is the control-unit variant of a wall-mounted HVAC drive, frame size R2. It ships with the control unit included. Rated for 5.5 kW normal duty (24.5 A) and 4 kW heavy-duty (16.7 A) on a 200-240 V three-phase supply, 47.5-63 Hz. The IP66 / NEMA 4X enclosure means it stands up to washdown environments without an extra cabinet.

Normal-use output current of 24.5 A (24 A UL) sets the motor full-load amp ceiling for continuous duty. Heavy-duty cycle drops to 16.7 A — that's the number to check if the load profile includes frequent starts or overloads. Standby loss is 14 W, so the heat load in a sealed panel is modest. Power factor is 0.98, which keeps the input current low relative to real power.

Integration checklist

Wall-mounted, frame R2. Two analog inputs and two analog outputs are on board. Six digital inputs and three digital outputs handle start/stop, fault reset, and status feedback. BACnet communication is built in — no option card required for BAS integration. The lithium coin cell (CR2032, 220 mAh) keeps the real-time clock alive during power loss.

Frequently asked questions

What does the 'Includes Control unit' mean?

The drive ships with the control unit already installed — it is not a separate order line. The part number covers the complete drive assembly.

What is the frame size?

Frame size R2. This determines mounting hole pattern, conduit entry locations, and heat sink dimensions.

What compliance documentation is available?

The drive carries UL listing (UL output ratings are provided) and IEC ratings. RoHS and REACH compliance are standard for ABB drives of this generation, though specific declarations are not in this evidence set.

MPN
3AXD50001002640