The 3AXD50001003036: Three duty classes are on the nameplate. Heavy-duty use (PhD) at 3 kW / 10.6 A is the rating for higher peak demands — crushers, extruders, or any load that needs extra torque headroom. Light-overload use (PlD) matches the normal-use power at 4 kW but slightly lower current (16.7 A), which matters if your motor nameplate is right at the boundary. The UL light-overload line is 5 Hp / 17 A at 240 V — a clean fit for North American 5 Hp motors on 240 V three-phase.
IP66 and NEMA 4X means this drive is sealed against hose-down and corrosive environments — food processing, washdown areas, outdoor installations under a canopy. Wall-mounted in Frame R1, so it fits a standard backplate without a floor-standing cabinet. Keep ambient below 40 °C for full rating; above that, derate per the drive's thermal curve. Standby loss is 13 W — negligible for panel heat load calculations but worth noting if you're running multiple drives in a sealed enclosure.